GVM 48"/120CM Carbon Fiber Motorized Camera Slider, Professional Camera Slider with Remote Control, Support Video Mode, Time Lapse Photography, Horizontal, Tracking and 120° Panoramic Shooting

【Three shooting modes】Tracking shooting: Adjust the red knobs on both sides of the camera slide to the upper left or lower right corner. The slide supports time-lapse shooting or video shooting, as well as manual and electric modes. 120° Panorama: The slide rail has a 120° panoramic mode, which can be achieved by adjusting the red knobs on both sides of the camera. Horizontal shooting: Freely set the distance between the starting point, A-end point B (supports automatic cycle).
【Two shooting modes】-One is video shooting, which allows you to keep a constant speed at any time and automatically go back and forth from the set starting and end points; the other is time-lapse shooting, which can take 1,000 photos at the same time, and can accurately adjust the step distance, and automatically go back and forth from the set starting and end points.
【Remote control】 You can use the remote control to set multiple parameters such as time-lapse shooting, video shooting, or time-lapse shooting shutter settings. You can set the starting and ending points, sliding speed, dwell time, sliding distance, pause time, number of shots, automatic loop, etc. as needed. During time-lapse shooting, you can check the number of remaining shots.
【Equipped with multiple 1/4-inch and 3/8-inch screw ports】The electric camera slide is equipped with 1/4-inch and 3/8-inch screw ports, making the slide compatible with various tripods.
【6 shutter cables and 1 extension cable】The electric slide rail is equipped with 6 shutter cables, which are compatible with most cameras. You can use the extension cable to solve the problem of insufficient shutter cable length. Fully meet your shooting needs, improve the shooting level, and make the shooting more professional and shocking.

Location: DFW, TX