WB44X200 Bake Element Replacement for GE 240V oven element wb44x200 - Suitable for jkp07g*d2, jkp16g*07, jkp16g*d1, jkp16g*d2, jkp16g*h1, jkp16g*j3, jkp16gj4, jkp16gj5,jkp16gj6 and more OVENS

✅【BAKE ELEMENT WB44x200】--- WB44X200 Oven Heating Element is designed for free standing electric ranges with screw-in terminals. It is at the bottom of the oven and supplies the heat for baking. The rated voltage is 240 Volt and the rated power is 3100 Watt. ▶The measurements: 13-1/4" wide X 16-5/8" deep (connectors go a little deeper), height from floor of oven to top of element is 1" AND TERMINAL ENDS SPACED ~1-1/4" APART (outside of element to outside of element) The package includes 1 x WB44X200 Oven Bake Element.
✅【MADE OF STAINLESS STEEL ALLOY】--- WB44X200 Oven Lower Bake Element is made of high quality stainless steel alloy, meet OEM requirements, and has a long service life. If any of the following occurs, replace it in time: ★Broken; ★Not working. ⚠️ To avoid a risk of electrical shock, before replacing it, you must unplug the range or shut off the circuit breaker to the unit. To avoid a risk of burn, make sure that the range is off, and the unit’s heating element is cool to the touch.
✅【SUITABLE FOR GE AND MORE BRANDS】--- replacement oven element WB44X200 Oven Heating Element can fit for GE, Hot-point, Ameri-cana and Ken-more Oven. ★Replaces Part Numbers: 3267, AP2031031, PS249424, EAP249424, JKP27GJ3, JKP27GJ4, JKP27J3, JKP27J4, JKP27J5, RJ742G*J4, RJ742G*J5, RJ742G*T6, RJ742G*T7, RJ745G*J1, RJ745G*J2, JRP03J5, JRP03J6, 21233 (1988), 21234(1988), 21235(1988), 21236 (1988), 21331(1988), JKP37G*L1, RJ735*T2, JKP26G*01, RK767*T4, JMP22*02, JMP22*01, RJ742G*T3, RJ742*T4, RK747G*T2, RK747*T5, RJ742*T1, RJ745G*T4, etc.
✅【BRING CONVENIENCE FOR YOUR LIFE】--- Before installing WB44X200 Oven Bake Element, unplug your oven or turn off the circuit breaker. Helpful tools include a Phillips screwdriver and a pair of work gloves. Unscrew the two screws that held the element in place, needed pliers to remove the sta-kon connectors from the old element. Attached them to the new element and put screws back in place. The operation is simple, and you can save a lot of repair costs.

Location: DFW, TX