.png)
ID: B0CN3758G1
Open
PATIKIL 32mm PEX Tube Bend Support, PEX Tube Metal 90 Degree Elbow Bend Support for Copper PEX Pipe Tubing, Silver Tone
Retail Value: $17.09
$1.00
Ends in
Condition: Open Box
Description
Color: Silver Tone, Material: Galvanized Iron, Fit for Pipe: 32mm, Inner Width: 34MM / 1.34", Size: 370 x 37 x 103MM / 14.57 x 1.46 x 4.06 Inch (L*W*H), Packing List: 1 x Tube Bend Support
Advantage: Galvanized material, strong and durable, and good load-bearing. Using a bend support to install pipes can avoid scratches during the installation process, improve the reliability of floor heating pipes, and increase the service life of floor heating.
Instruction: 1. Prepare the floor heating pipe that needs to be bent, and place it flat on the work surface to keep it stable and not slipping. 2. Put the pipe into the opening at the rear of the bend support until a section of the pipe is exposed. At this time, both ends of the pipe should be outside the clamping opening of the bend support. 3. Adjust the position of the pipe so that it is within the appropriate bending range, and then fix it with springs on both sides.
Application: Tube bend support is a common pipe fitting. It is used as an auxiliary tool to help the floor heating pipes quickly bend and shape. Prevent floor heating pipes from twisting, shrinking, or loosening and falling off; increasing the reliability and security of floor heating. Suitable for copper, PEX pipes and other pipe connections.
NOTE: Please confirm the diameter of the installation pipe before purchasing.
Advantage: Galvanized material, strong and durable, and good load-bearing. Using a bend support to install pipes can avoid scratches during the installation process, improve the reliability of floor heating pipes, and increase the service life of floor heating.
Instruction: 1. Prepare the floor heating pipe that needs to be bent, and place it flat on the work surface to keep it stable and not slipping. 2. Put the pipe into the opening at the rear of the bend support until a section of the pipe is exposed. At this time, both ends of the pipe should be outside the clamping opening of the bend support. 3. Adjust the position of the pipe so that it is within the appropriate bending range, and then fix it with springs on both sides.
Application: Tube bend support is a common pipe fitting. It is used as an auxiliary tool to help the floor heating pipes quickly bend and shape. Prevent floor heating pipes from twisting, shrinking, or loosening and falling off; increasing the reliability and security of floor heating. Suitable for copper, PEX pipes and other pipe connections.
NOTE: Please confirm the diameter of the installation pipe before purchasing.
Location: DFW, TX
- Shipping
- Please wait...
1.00
Bids History
| Bidder | Amount | Date |
|---|---|---|
| J****8 | $1.00 | 07/28/2025 19:57:01 |