Panasonic 27 in. W Trim Kit for 1.2 cu. ft. Microwave Ovens in Stainless Steel

Looking for a space-saving solution in your kitchen. Convert your Panasonic 1.2 cu. ft. countertop microwave oven to a built-in model with the Panasonic NN-TK621SS 27 in. microwave trim kit. This Trim Kit consists of the trim frame, an upper, lower and rear duct that attaches to and encases the microwave inside the cabinet cut-out opening to give your kitchen a stylish look while freeing up precious countertop space. The Panasonic Trim Kit is designed for use only with select Panasonic Microwave Ovens. for safety, unplug the microwave oven before attempting installation of the NN-TK72LSS trim kit. Installation of this trim kit requires basic mechanical and electrical skills and may be completed by the DIY homeowner or kitchen cabinetry professional. Proper installation is the responsibility of the installer. The microwave oven must be used with a properly grounded 3-prong receptacle in compliance with the National Electrical code, as well as any applicable local regulations. Also refer to the microwave oven operating instructions for other safety and electrical requirements. This trim kit is only compatible with Panasonic Microwave Ovens.. Stainless steel 27 in. microwave trim kit compatible with select 1.2 cu. ft. Panasonic microwave models including NN-SN68KS, NN-SN67KS, NN-SN686SR, NN-SN686S, NN-SN67HST. Compatrim kit outer size - 684 mm or 27 in. W x 419 mm or 16-1/2 in. H x 20mm or 3/4 in. D table models include NN-SN661S and NN-SD681S. Trim kit inner size: 20-7/8 in. W x 12-1/4 in. H. Required cabinet opening - 648 mm or 25-1/2 in. plus 8mm or 5/16 in. - 0 mm W x 389mm or 15-5/16 in. plus minus 2 mm or 5/64 in. H x minimum 533 mm or 21 in. D and minimum 920 mm or 36-1/4 in. from the floor. Tools needed for installation - measuring tape, pencil, Phillips screwdriver, ø 2 (5/64 in. ) mm drill. Appliance Category: Appliance Parts. Appliance Series: Not Applicable. Appliance Type: Part/Accessory. Brand Compatibility: Panasonic. Color/Finish: Stainless Steel. Compatible Appliance Type: Microwave. Hardware Included: Yes. Microwave Part Type: Microwave Trim Kit. Model Compatibility: NN-SN6xxS. Product Depth (in.): 0.75 in. Product Height (in.): 16.5 in. Product Width (in.): 27 in

Location: DFW, TX