5-Pack 433MHz Garage Door Remote Control - Auto Sliding/Gate Opener & Closer, Electric Cloning Replacement for Rolling Driveway Gates - Compatible with Most Fixed Code Openers

Wide Compatibility: Open any 433.92 MHz sliding gate from a distance with this handy remote control. PLEASE NOTES: The market includes various types of gate systems using different encoding technologies (e.g., Fixed Code), this product is only compatible with most fixed-code 433MHz gate systems – NOT compatible with rolling code or encrypted systems (e.g., Som-mer, LiftM-aster Secu-ralift, Ni-ce, etc.)”

Copy the IC Model: PT2260, PT2262, PT2264, PT1527, PT527, PT1587, PT1827, HS2260, HS2262, HS2264, HS2240, HS1527, HS527, HS1587, HS1827, RT2260, RT2262, RT2264, RT2240, RT1527, SC527, SC1587, SC1827, SC2260, SC2262, SC2264, SC2240, SC1527, SC527, SC1587, SC1827, EV2262, EV2264, EV2240, EV1527. PLEASE NOTES: “This is a fixed-code remote; it does not support remote-to-remote learning or auto-cloning.” Be sure to check the applicable chip type before purchasing!!!

Easy to Clear Old Codes: Simultaneously long press the A and B key on the universal gate remote until the LED indicator keeps flashing, then you can let go, you could press any keys to test, if the LED indicator blinks instead of keeping flashing, which means codes have been cleared. “Compatible with most fixed-code 433MHz gate systems” “Not compatible with rolling code systems or encrypted protocols.”

Methods to Duplicate: Place the universal remote for gate opener and old remote control side by side; Press the A button (Do not move); Then press the corresponding button of the old remote control to copy; The LED indicators will flash about 3 times, then you can let go; Reset the BCD key in the same way as the A key.

4 Keys to Control: There are 4 keys on the remote controls for gates to open, close, bell and call the police. Convenient and practical, which are suitable for rolling shutter door, rolling gate, telescopic door, garage door, road gate, etc.

Important: Our product is designed for standard coding systems and is not compatible with special rolling code (dynamic code) systems. Rolling code technology generates a unique, constantly changing code with each use, meaning the signal cannot be reused. As a result, our device will not function properly after the first use in such systems. We strongly advise to verify your system type before purchasing.

Location: DFW, TX